🎉 Up to 70% Off Selected ItemsShop Sale
Maple Varnished Plywood
Material Finish
Our Varnished laser plywood has an A-A grade finish, meaning that both sides of the sheet are high quality both isdes with varnished satin look finsh and PE protective film. Note that colours may vary when viewed on different monitors, For exact colour swatches you can purchase sample swatch packs. See sample swatches in the materials list.
Please also note the PE protective film is safe to cut thorgh however when engraving this film should be removed for the best quality finsih. The siface can be masked with paper tape or the surface can be cleaned after cutting and engraving with Methylated spirits or isopropyl alcohol. You may seee a white edge when cutting and engraving. For engraving you can use an oil to reduce any white edge and may fine that paint filling the egrave gives a better outcome with stronger contrast, for cutting is it recommended to cut faster with good air assist to reduce any white edge.
Material structure
Our laser plywoods are designed specifically with laser cutting in mind. The material has an MDF core and is a very popular material in our range, offering structurally rigidity. This veneer ply is great for structural items and large thin signage that will not bow warp or bend. The MDF core is also a solid apprearance and so give to look of a solid wood when laser cut. Our plywood materials are all manufactured with formaldehyde free glue adhesives.
Why use laser ply?
There are many plywoods materials available in the industry, many of which are built for construction and exterior use. These plywoods are manufactured with different types of glue and resin that may be hard to cut, increasing your cutting time, edge charring and chance of laser cutting flame. They also may be manufactured with glue containing formaldehyde. Using out laser ply, you will have a cleaner faster and safer laser cut with lighter cut edge colour.
Our Varnished laser plywood has an A-A grade finish, meaning that both sides of the sheet are high quality both isdes with varnished satin look finsh and PE protective film. Note that colours may vary when viewed on different monitors, For exact colour swatches you can purchase sample swatch packs. See sample swatches in the materials list.
Please also note the PE protective film is safe to cut thorgh however when engraving this film should be removed for the best quality finsih. The siface can be masked with paper tape or the surface can be cleaned after cutting and engraving with Methylated spirits or isopropyl alcohol. You may seee a white edge when cutting and engraving. For engraving you can use an oil to reduce any white edge and may fine that paint filling the egrave gives a better outcome with stronger contrast, for cutting is it recommended to cut faster with good air assist to reduce any white edge.
Material structure
Our laser plywoods are designed specifically with laser cutting in mind. The material has an MDF core and is a very popular material in our range, offering structurally rigidity. This veneer ply is great for structural items and large thin signage that will not bow warp or bend. The MDF core is also a solid apprearance and so give to look of a solid wood when laser cut. Our plywood materials are all manufactured with formaldehyde free glue adhesives.
Why use laser ply?
There are many plywoods materials available in the industry, many of which are built for construction and exterior use. These plywoods are manufactured with different types of glue and resin that may be hard to cut, increasing your cutting time, edge charring and chance of laser cutting flame. They also may be manufactured with glue containing formaldehyde. Using out laser ply, you will have a cleaner faster and safer laser cut with lighter cut edge colour.
Select Choose Thickness
Select Sheet Size
From $2.32
Original: $7.73
-70%Maple Varnished Plywood—
$7.73
$2.32Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Material Finish
Our Varnished laser plywood has an A-A grade finish, meaning that both sides of the sheet are high quality both isdes with varnished satin look finsh and PE protective film. Note that colours may vary when viewed on different monitors, For exact colour swatches you can purchase sample swatch packs. See sample swatches in the materials list.
Please also note the PE protective film is safe to cut thorgh however when engraving this film should be removed for the best quality finsih. The siface can be masked with paper tape or the surface can be cleaned after cutting and engraving with Methylated spirits or isopropyl alcohol. You may seee a white edge when cutting and engraving. For engraving you can use an oil to reduce any white edge and may fine that paint filling the egrave gives a better outcome with stronger contrast, for cutting is it recommended to cut faster with good air assist to reduce any white edge.
Material structure
Our laser plywoods are designed specifically with laser cutting in mind. The material has an MDF core and is a very popular material in our range, offering structurally rigidity. This veneer ply is great for structural items and large thin signage that will not bow warp or bend. The MDF core is also a solid apprearance and so give to look of a solid wood when laser cut. Our plywood materials are all manufactured with formaldehyde free glue adhesives.
Why use laser ply?
There are many plywoods materials available in the industry, many of which are built for construction and exterior use. These plywoods are manufactured with different types of glue and resin that may be hard to cut, increasing your cutting time, edge charring and chance of laser cutting flame. They also may be manufactured with glue containing formaldehyde. Using out laser ply, you will have a cleaner faster and safer laser cut with lighter cut edge colour.
Our Varnished laser plywood has an A-A grade finish, meaning that both sides of the sheet are high quality both isdes with varnished satin look finsh and PE protective film. Note that colours may vary when viewed on different monitors, For exact colour swatches you can purchase sample swatch packs. See sample swatches in the materials list.
Please also note the PE protective film is safe to cut thorgh however when engraving this film should be removed for the best quality finsih. The siface can be masked with paper tape or the surface can be cleaned after cutting and engraving with Methylated spirits or isopropyl alcohol. You may seee a white edge when cutting and engraving. For engraving you can use an oil to reduce any white edge and may fine that paint filling the egrave gives a better outcome with stronger contrast, for cutting is it recommended to cut faster with good air assist to reduce any white edge.
Material structure
Our laser plywoods are designed specifically with laser cutting in mind. The material has an MDF core and is a very popular material in our range, offering structurally rigidity. This veneer ply is great for structural items and large thin signage that will not bow warp or bend. The MDF core is also a solid apprearance and so give to look of a solid wood when laser cut. Our plywood materials are all manufactured with formaldehyde free glue adhesives.
Why use laser ply?
There are many plywoods materials available in the industry, many of which are built for construction and exterior use. These plywoods are manufactured with different types of glue and resin that may be hard to cut, increasing your cutting time, edge charring and chance of laser cutting flame. They also may be manufactured with glue containing formaldehyde. Using out laser ply, you will have a cleaner faster and safer laser cut with lighter cut edge colour.
